Publicité
Les langues disponibles
Les langues disponibles
Setup
h Thinning the material
Thinning the spray material results in faster spraying, a better finish and less material usage.
• Thin chalk, milk, latex and other thicker decorative paints with water
• Oil-based materials need to be thinned with mineral spirits.
• Transparent/semi-transparent stains, clear topcoats and lacquers do not require thinning.
Do not thin with materials that have a flashpoint below 100°F (38°C).
The material flashpoint should be shown on the material container.
1
2
Spray
material
3
4
© Wagner Spray Tech. - All Rights Reserved
All manuals and user guides at all-guides.com
note: For a video showing how to set up the Home
Décor Sprayer, visit www.homedecorsprayer.com.
Water
1. Unscrew the container from the spray
gun.
Secure the thinning accessory to the
side of the container.
2. Fill the container with spray material
to the bottom of any one of the
notches on the thinning accessory.
Add water or mineral spirits to the top
of the same notch to thin by 10%.
note: For every notch that the fluid
level in the container rises, the spray
material is diluted by 10%.
3. Align the suction tube -
• Spraying downwards: the angled
end of the suction tube should be
pointing toward the front of the
gun.
• Spraying upwards: the angled
end of the suction tube should be
pointing toward the rear of the
gun.
4. Screw the container back onto the
spray gun and attach the hose to the
gun and base.
English
5
Publicité
