Black & Decker PRO Serie Mode D'emploi page 6

ENGLISH
Warning: Before performing any maintenance,
switch off and unplug the tool.
• Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Cleaning
Blowing dust and grit out of the wheel guards using
compressed air is a necessary regular maintenance
procedure. Dust and grit containing metal particles often
accumulate on interior surfaces and could create an
electrical shock hazard if not frequently cleaned out.
ALWAYS WEAR SAFETY GLASSES.
Caution: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. Use clean, dry rag only.
Accessories
The performance of your tool depends on the accessory
used. Black & Decker and Piranha accessories are
engineered to high quality standards and designed to
enhance the performance of your tool. By using these
accessories you will get the very best from your tool.
Grinding wheels must fit within the confines of the guard and
must be rated higher than the recommended speed as
marked on the nameplate (2950rpm).
Caution: Strands of wire brushes may break
and fly off while in use. Users and others in the
area should wear adequate eye, face and body
protection. Use only wire brushes that are rated at or greater
than the RPM shown on the tool's nameplate. Do not use
the spacer with grinding wheels.
Warning: To reduce the risk of injury, always
use proper guards when grinding and wear eye
protection.
Caution: The use of any non-recommended
accessory may be hazardous.
6
All manuals and user guides at all-guides.com
Technical data
Voltage
Power input
Dimension of Grinding Wheel
Diameter
Thickness
Bore diameter
BPGB3150
V 220-240 V ~ 50Hz
AC
W 373W (1/2 HP)
mm 150
mm 15-17
mm 12.7-12.91