Sedus open mind Mode D'emploi page 9

F
Seat angle (optional)
®
Tilting the seat forward:
Stand up
1.
Twist the knob under the
2.
seat backwards by 180°,
the seat will tilt forward by 4°
®
Levelling the seat:
Stand up
1.
Swivel the lever located under
2.
the seat forwards through 180°,
the seat tilts back into the zero
position
I
G
Adjusting the 3D armrests
(optional)
®
Adjusting the armrest height:
Press the button on the inside
1.
of the armrest and lift or lower
the armrest to the desired height
Release the button on the inside
2.
of the armrest to engage
®
Adjusting the armrest depth:
Push the armrest backwards
or forwards; with a click-stop
®
Swivelling the armrest:
The armrest covers swivel to the
left and right, with a click-stop
H
D
A C
H
Adjusting the 3D armrests at the
sliding seat version (optional)
®
Adjusting the armrest height:
Press the button on the inside
1.
of the armrest and lift or lower
the armrest to the desired height
Release the button on the inside
2.
of the armrest to engage
®
Adjusting the armrest depth:
Push the armrest backwards
or forwards; with a click-stop
®
Swivelling the armrest:
The armrest covers rotate freely
through 360°; by turning them
only 180°, you can change the
width between the armrests
®
Adjusting the armrest width:
Loosen the bolts with a
1.
Torx-head screwdriver (TX30)
Move armrests into required
2.
position
Tighten bolts again
3.
I
Adjustment of the headrest
(optional)
®
Adjusting the headrest height:
Push the headrest to the
desired height (it is contin-
uously adjustable)
®
Headrest angle: Adjust the tilt of
the headrest as desired
English 9