NOMA Estate 52 Manuel D'instructions page 8

Note: Before starting installation, disconnect the power
by turning off the circuit breaker or removing the fuse
!
at the fuse box. Turning power off using the fan switch is
not sufficient to prevent electric shock.
1. Unscrew three screws from the light kit.
2. While holding the light holder under your fan, make the
polarized plug connections:
- White to white.
- Blue to black.
3. Attach the light kit into the switch house and secure
with three screw.
4. Install two 60 W E26 bulbs (not included).
5. Remove the finial, cap, hex nut and washer from the
light kit.
6. Raise the glass shade up against the light kit, place the washer
over the light kit and turn hex nut clockwise until it locks up
against the light kit. Do not over-tighten. Place the cap over
the light kit and secure the finial provided (see Fig. 12).
7. Restore power and your light kit is ready for operation.
All manuals and user guides at all-guides.com
Installing the Light Kit
8
Switch housing
Connection plugs
Light kit
Bulb
(not included)
Fig. 12
Screws
Glass shade
Washer
Hex nut
Cap
Finial