Publicité
Les langues disponibles
Les langues disponibles
Finishing the Fan Installation
1. Tuck connections neatly into ceiling outlet box.
2. Slide the canopy up to the mounting bracket, align the
locking slots of the ceiling canopy with the two screws
in the mounting bracket. Push up to engage the slots, and
turn clockwise to lock the canopy in place.
3. Firmly tighten the two mounting screws.
4. Install the remaining two mounting screws into the holes
in the canopy and tighten firmly.
Warning: Make sure the tab on the hanging bracket
!
properly sits in the groove in the hanger ball before
attaching the canopy to the bracket by turning the
housing until it drops into place.
1. Attach the blade to the blade arm using the blade screws
as shown in Fig. 11.
2. Tighten each screw. Make sure the blade is straight.
3. Fasten one blade assembly to the motor using the two blade arm
screws and spring washers supplied (see Fig. 11).
4. Repeat this process with the other blades
Warning: To reduce the risk of personal injury, do not
bend the blade arms while installing, balancing the
!
blades, or cleaning the fan. Do not insert foreign objects
between rotating fan blades.
All manuals and user guides at all-guides.com
Attaching the Fan Blades
Mounting
bracket
Spring washer
Blade arm screw
7
Outlet box
Canopy
mounting
washer
screw
Canopy
Canopy
bottom cover
Fig. 10
Blade screw
Blade
Blade arm
Fig. 11
Publicité
