Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Remote control
The remote control does not function.
Point the remote control at the remote sensor on the amplifier.
Remove any obstacles in the path between the remote control and
the amplifier.
Replace all the batteries in the remote control with new ones, if they
are weak.
Make sure you select the correct input on the remote control.
20
US
Initializing the amplifier
When the amplifier is turned off, hold down the button on the
amplifier for about 5 seconds. The amplifier is reset to the initial
setting.
Publicité
Chapitres
Table des Matières
Dépannage
