U.S.Robotics Courier 56K Guide D'installation Rapide page 8

Windows XP
NOTE: Windows XP users must be in administrator mode to properly add
any new hardware.
Turn on your computer. Windows will detect your new modem and automatically
install it, then you must update the driver. Insert the Installation CD-ROM into
your CD-ROM drive. Click X to close the Setup Language screen. Click Windows
Start and Control Panel. Make sure you are in Classic View, and double-click the
System icon. Click the Hardware tab. Click Device Manager and then double-
click the Modems tab. Right-click Courier V.Everything Ext PnP (V90-x2) and click
Update Driver . When the Hardware Update Wizard appears, select Install from
a list or specific location (Advanced) and click Next. Select Don't search. I will
choose the driver to install. Click Next. Click Have Disk. Type D:\ and click OK. If
your CD-ROM drive uses a different letter, type that letter in place of "D". Select
U.S. Robotics Courier V.Everything EXT PnP and click Next. A Hardware
Installation warning may appear. Click Continue Anyway if it does*. Click Finish
to complete the installation.
All Other Operating Systems
Beyond full support of the Windows Operating Systems described in this
manual, the Courier 56K Business Modem will function in any operating system
that supports an RS-232 COM port, such as DOS, Linux, or UNIX. Standard COM
port settings are: bits per second: 115,200; data bits: 8; parity: none; stop bits:
1; flow control: hardware. Assign your terminal application to utilize the COM
port to which you connect the modem's serial cable. Additional setup
information can be found in the 3453 FAQ section at http://www.usr.com/
support
*U.S. Robotics has thoroughly tested this driver in conjunction with the supported hardware and has
verified compatibility with Windows XP and 2000.
Would you like to install the Instant Update software?
The Instant Update software automatically notifies you of any updates to your
modem's code.
To install the Instant Update software, keep the Installation CD-ROM in your CD-
ROM drive. Click Windows Start and then click Run. In the "Run" dialogue box,
type D:\setup.exe. If your CD-ROM drive uses a different letter, type that letter in
place of "D". Choose the Software option, select U.S. Robotics Instant Update,
and then follow the on-screen instructions to install the Instant Update software.
8
All manuals and user guides at all-guides.com