Using Front Stage Surround Advance; Using Stream Direct; Using The Sound Retriever - Pioneer VSX-518 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

05
Listening to your system
Using Front Stage Surround
Advance
The Front Stage Surround Advance function
allows you to create natural surround sound
effects using just the front speakers and the
subwoofer.
AUTO/DIRECT
PHASE
While listening to a source, press STEREO/
A.L.C. to select Front Stage Surround Advance
modes.
• STEREO – See Listening in stereo on
page 25 for more on this.
• A.L.C. – See Listening in stereo on page 25
for more on this.
• F.S.S.FOCUS – Use to provide a rich
surround sound effect directed to the
center of where the front left and right
speakers sound projection area converges.
• F.S.S. WIDE – Use to provide a surround
sound effect to a wider area than FOCUS
1
mode.
FOCUS position (Recommend)
Front left
Front right
speaker
speaker
Note
1 When using F.S.S. WIDE, a better effect can be obtained if Quick Setup is performed (see Using the Quick Setup on page 7).
2 The Sound Retriever is only applicable to 2-channel sources.
26
En
STEREO/
STANDARD
ADV SURR
A.L.C.
QUICK
SOUND
SETUP
DIALOG
RETRIEVER
WIDE position
Front left
Front right
speaker
speaker

Using Stream Direct

Use the Stream Direct modes when you want
to hear the truest possible reproduction of a
source. All unnecessary signal processing is
bypassed.
STEREO/
AUTO/DIRECT
A.L.C.
QUICK
PHASE
SETUP
While listening to a source, press AUTO/
DIRECT to select Stream Direct mode.
• AUTOSURR. – See Auto playback on
page 24.
• DIRECT – Sources are heard according to
the settings made in the Surround Setup
(speaker setting, channel level, speaker
distance), as well as with dual mono
settings. You will hear sources according
to the number of channels in the signal.
For analog sources, only Channel Level can
be set. All other digital processing can not
be set.

Using the Sound Retriever

When audio data is removed during the
compression process, sound quality often
suffers from an uneven sound image. The
Sound Retriever feature employs new DSP
technology that helps bring CD quality sound
back to compressed 2-channel audio by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
STEREO/
AUTO/DIRECT
A.L.C.
QUICK
PHASE
SETUP
Press SOUND RETRIEVER to switch the
sound retriever on or off.
STANDARD
ADV SURR
SOUND
DIALOG
RETRIEVER
2
STANDARD
ADV SURR
SOUND
DIALOG
RETRIEVER

Publicité

Chapitres

Table des Matières
loading

Table des Matières