Publicité
Les langues disponibles
Les langues disponibles
A08
A09
A10
A11
A12
EN
A09- Push the central part of the travel cot downwards as shown in the photo.
A10 - The structure of the travel cot is now assembled successfully.
A11- Put the mattress down and with help of the Velcro pass them tapes through each
A12 - If you want to use the elevator, place the tubes as shown in the photo
To place the changer, use the zipper placed in it, in one of the headboards of the travel cot.
The changer to the cradle using the zipper.
POSSIBLE PROBLEMS AND SOLUTIONS
A13
A14
A13- Problem - As in the photo.
A14- Solution - Hold the base tape and lift. Then repeat steps A02-A03-A07-A08-A09.
Publicité
