YUNEEC TYPHOON H Plus Guide De Démarrage Rapide page 7

Power ON / OFF
NOTICE:
Please make sure all firmware is the latest version. Firmware and
the user manual may be downloaded from web site: www.yuneec.com. The
quick start guide does not replace the user manual.
Turn on the ST16S, and then press the power button on TYPHOON H Plus.
Release the button when the aircraft emits a rising tone. Power on the ST16S
before powering on the UAS.
Take Off
Press and hold the START/STOP
button for about 3 seconds to start
the motors in angle mode.
All manuals and user guides at all-guides.com
POWERING
ON ST16S
POWERING ON
TYPHOON H
PLUS
OPTION 1:
Slowly raise the left-hand stick to take
off.
OPTION 2:
Tap the icon [ ] and slide on the
screen to take off.
Retract Landing Gears
Raise the landing gear control using
the landing gear control switch on the
ST16S.
Landing
Step 1)
Lower the landing gear
using the same control as used for
retracting landing gear.
NOTICE:
Lower the landing gear at
least 12' above the landing area.
Step 2)
Slowly lower the left-hand
stick below the center position,
TYPHOON H PLUS will descend
slowly and land. After TYPHOON H
PLUS lands, the motors will stop after
2 seconds without any operation.
Take Off