Uline H-9188 Mode D'emploi page 5

WALL ANCHOR
1. Attach one bracket of wall anchor (K) to back of top
panel using two M4 x 20 mm screws. Mark holes on
wall where plastic anchors are to be located. Drill
holes using 5/16" drill bit. Mount opposite bracket of
wall anchor to wall with two M4 x 40 mm screws and
two M8 x 36 mm plastic anchors. Tighten cable tie
to prevent tipping. (See Figure 12)
PAGE 5 OF 15
ASSEMBLY CONTINUED
Figure 12
1-800-295-5510
uline.com
Top
Back
Wall
K
0723 IH-9188