Hansgrohe Metris C 310731 Serie Instructions D'installation page 10

SW 10 mm
Q UIC K
CL EAN
10
SW 19 mm
English
Connect the hoses to the valves.
Tighten the hose nuts using two wrenches, as
shown.
Do not allow the hoses
to twist. A twisted hose
may become loosened
from the spout, causing
a leak.
Install ½" supply lines (not included) on the
hot and cold valves.
The aerator uses QuickClean. Deposits of
mineral scale can be removed by rubbing
across the channels with a finger or sponge.