Keurig K2.0-300 Serie Guide page 21

KEURIG TM CARAFE OPERATION
This unique Keurig TM Carafe was specifically designed for use with the Keurig
brewer. To connect the Keurig
securely inserted into the brewer. The Keurig
determines when the Keurig
Keurig TM Carafe is not in place or incorrectly inserted, the brewing process will not begin. If
the Keurig TM Carafe is removed during brewing, brewing will stop.
CAUTION: Make sure the Keurig
CAUTION: After brewing, the Keurig
when pouring from the Keurig
where hot steam is venting. Never allow children to use the Keurig
the brewer without adult supervision. Press the Power Button to terminate the brew
process. Follow the instructions on the Touchscreen before removing the Keurig
The brewer will return to the home screen. Remove and discard the used K-Carafe
CAUTION: There is extremely hot water in the Pack Holder during the brew process.
To avoid risk of injury, do not lift the Handle during the brewing process.
To maintain the ideal combination of taste, freshness and temperature, we recommend
preheating the Keurig TM Carafe. To preheat the Keurig
approximately 30 seconds and then pour out entirely prior to placing the Keurig
into the brewer.
CAUTION: HAND WASH ONLY. DO NOT SUBMERGE. DO NOT MICROWAVE.
All manuals and user guides at all-guides.com
TM Carafe to the brewer, make sure the Keurig
®
2.0 brewer contains a sensory system that
TM Carafe is in place and it is safe to begin brewing. If the
TM Carafe is empty before each use.
TM Carafe will contain extremely hot liquid. Take care
TM Carafe. Never place your hand over the Keurig
21
®
TM Carafe is
TM Carafe or operate
TM Carafe, fill it with hot water for
SECTION 2
2.0
TM Carafe
TM Carafe.
TM pack.
TM Carafe