GE 29861 Mode D'emploi page 16

While Scanning Messages
• To stop playback, press and release STOP.
• To hear the complete message, press and release the mailbox button where the
message is located before the unit goes on to the next message.
• To restart the message, press and hold PREVIOUS.
• To skip to the next message, press and release NEXT.
• To erase the message, press and hold ERASE until the unit announces it has been
erased.
• To move the message to another mailbox, press and release the desired mailbox
where you want to move the message.
NOTE: New messages must be heard completely, including the time/day
stamp, before they can be erased. The unit will announce you have no
messages to erase, if not.
Erasing All Messages in a Mailbox
1. When the answerer isn't playing or recording messages, press and hold ERASE.
The answerer will ask you to select a mailbox.
2. Press and release the mailbox button you want to erase. The answerer announces
the messages have been erased.
TIP: The 29861 is equipped with a special feature to retrieve deleted
messages.
You may retrieve all deleted messages in a particular mailbox
immediately after utilizing the Erase All function, by pressing the mailbox
button from which you just deleted the messages. The Message Counter
shows the original number of messages stored in that mailbox before the
message deletion.
Do not press any other buttons before you retrieve a deleted message,
otherwise the messages are permanantly deleted.
NOTE: If there are unheard messages in a mailbox, they will not be erased
by Erase All. If there are only new messages in a mailbox, the unit will
announce "Zero messages erased".
1
All manuals and user guides at all-guides.com