Télécharger Imprimer la page

Kohler K-8548 Guide D'installation page 2

Kit de valve inverseur
Masquer les pouces Voir aussi pour K-8548:

Publicité

Les langues disponibles

Les langues disponibles

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Adjustable
Wrench
Before You Begin
WARNING: Risk of personal injury. This product is a diverter
valve only and should never be used as a shut-off valve. Doing
so would allow cross flow between the hot and cold water
supplies and create a serious scalding hazard.
Observe all local plumbing and building codes.
Shut off the main water supply.
Provide an access panel for all installations.
This diverter can be installed to decks with a maximum thickness
of 1-1/4" (3.2 cm).
Carefully inspect waste and supply tubing for any sign of
damage. Replace if needed.
NOTE: Plumbing codes may require a vacuum breaker be installed
in-line to handshowers. Please consult with local plumbing codes. If
a vacuum breaker is required, ensure that it is not installed between
the handshower high pressure and interlock hoses.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1000588-2-C
All manuals and user guides at all-guides.com
Tape
Measure
Solder
3/32" Hex
Wrench
2
Propane
Torch
Kohler Co.

Publicité

loading

Ce manuel est également adapté pour:

K-8549K-10342