Publicité
Les langues disponibles
Les langues disponibles
5. Programming instructions
To activate program mode, press the
The ▲ and ▼ buttons are used to switch between the various programming main levels: Clock – Humidity – Tempe-
rature – Timer.
To exit program mode from main level, press and hold the
90 seconds. To switch from sub to main level as well hold the
5.1 Programming the clock
5.1.1 Adjusting the time
The clock symbol fl ashes when program mode is active.
Press the
button, the hours will fl ash – "12".
Use the ▲ and ▼ buttons to set the hours between 0 and 23.
Press the
button and the minutes will fl ash - "00".
Use the ▲ and ▼ buttons to set the minutes between 0 and 59.
Press the
button, the seconds will fl ash - "00".
Use the ▲ and ▼ buttons to set the seconds between 0 and 59.
Note: Once the clock has been set at least once, you can use ▲ or ▼ to directly access the settings "HUM", "TEMP"
or "TIME".
Attention: The ClimaControl system does not automatically switch between summer time and winter time.
This change must be entered manually.
8
All manuals and user guides at all-guides.com
button.
button for 3 seconds or do not press any buttons for
button for 3 seconds.
Publicité
