Publicité
Les langues disponibles
Les langues disponibles
4. Quick reference guide for programming
Switching to program mode:
Switching to operating mode:
Cancel programming:
Backlighting:
Manual deactivation
of an audio signal:
Manual activation/deactivation
All manuals and user guides at all-guides.com
Pressing the
button while in operating mode will activate the program mode.
Having completed your settings in program mode, you can return to operating
mode by pressing the
90 seconds, the system automatically switches back from program to operating
mode. Programmed values are saved.
If you want to cancel all changed values please unplug device before returning
to operating mode. Changed values will not be saved.
It is possible to toggle between permanent illumination of the display and
automatic deactivation of illumination. Press and hold the ▲ button in operating
mode and then press Taste ▼. If the illumination is switched off and the device
beeps twice, the display illumination is in automatic mode (backlighting is
automatically switched off after 120 seconds of inactivity). When the backlighting
is turned on and you hear a single beep, it will remain permanently on.
An audible alarm signal can be deactivated by pressing any key.
The audio signal will only sound again when the next deviation from the
programmed desired value is detected.
Both slots can be turned on and off manually. To activate slot 1 (
press
. Press these buttons a second time, slot 1 (
press it a third time, program mode for slot 1 (
The second line in the display indicates "ON", "OFF" or your programmed value
for humidity.
To activate slot 2 (
), hold ▲, then press
time, slot 2 (
) is deactivated. If you press it a third time, program mode for slot
2 (
) is reactivated.
The third line in the display indicates "on", "OFF" or your programmed
temperature value. If slot 2 (
"P ON" or "P OFF" appears in the display indicating permanently ON or OFF.
button for 3 seconds. If no button is pressed for
) is reactivated.
. Press these buttons a second
) is time-controlled and not temperature-controlled,
), hold ▲, then
) is deactivated. If you
7
Publicité
