Bosch BCM3100 Notice D'utilisation D'origine page 8

English – 6
The ConnectModule requires a working GPS and mo-
bile data connection in order to function.
The ConnectModule has motion sensors, a global po-
sitioning system and mobile communications. These
enable the ConnectModule to identify suspicious
movements of the eBike, establish the location of the
eBike and sound an alarm on the bicycle itself.
Position and movement data is displayed to the
owner of the eBike through the app eBike Flow.
The ConnectModule provides additional services,
such as <eBike Alarm>, which is available to the end
customer in the app eBike Flow. More detailed infor-
mation about the individual services of the app eBike
Flow can be found in the app itself.
Charges apply for the use of some services. Details
can be found in the app eBike Flow.
Start-up
As soon as a ConnectModule is installed on an eBike,
it can be activated through the app eBike Flow. This
is only necessary once.
Services such as the <eBike Alarm> can be activated
and used through the app eBike Flow.
Depending on the operating system of the
smartphone, the eBike Flow app can be
downloaded free of charge from the Apple
App Store or Google Play Store.
Scan the code with your smartphone to download the
eBike Flow app.
The services of the ConnectModule can be deacti-
vated at any time through the app eBike Flow. Pro-
vided the user has a valid activation, they will be able
to reactivate all services.
There is no means of deactivating the ConnectModule
itself.
0 275 U08 3CM | (06.03.2023)
Operation
Switching on/off
The ConnectModule does not need to be switched on
or off separately.
As long as the ConnectModule is supplied with volt-
age and the relevant services are activated, it sends
data to the eBike owner.
The ConnectModule has its own internal battery, so
its services are not dependent on the eBike battery's
state of charge. The charge level of the internal bat-
tery can be viewed through the app eBike Flow. If the
internal battery's state of charge is critical, an eBike
battery should be inserted and the Bosch eBike
charger should be connected.
Switching On Whilst eBike Alarm is Active
When you move your eBike whilst the <eBike Alarm>
is active, the alarm will not go off so long as you have
your smartphone with you.
To set off on your eBike, press the on/off button on
the operating unit.
For eBikes with assistance up to 28 mph, you also
need to actively select a mode after turning it on.
Bosch eBike Systems