Adventys BRIC Serie Guide D'utilisation page 23

Uae of the preaet « P1 » tnd « P2 » touchea
« P1 » and « P2 » have multiple usage:
- They are « preselected » power or temperature levels. The user selects the power level of temperature that
needs to be memorized by holding « P1 » or « P2 » for 3 seconds - bip sound means it is saved. Even if the
product is unplugged and plugged back, « P1 » and « P2 » will remain saved.
« P1 » saves 1 temperature level + 1 power level, « P2 » saves 1 temperature level + 1 power level, so you have
4 memorized options. To change at any time the memorized power or temperatur elevel, press « P1 » and « P2 »
and the new power or temperature level will be saved.
Recommendation: memorize the power or temperature level the most commonly used; this way the next time
the user turns the unit on, all he needs to press is « ON/OFF » and « P1 » or « P2 » to have the quickest access
to desired power or temperature.
- The are indicator of temperature. When in ttemperature mode, after selecting a temperature level, press « P1 »
and « P2 » simultaneously: the temperature of the vitroceramic glass/bottom of the pan appaers on the
display.
Switching modea
By pressing simultaneously (+) and (-), you can:
- Switch from power lieveli a to wttta lievelia and reciprocally, from watts levels to power levels (within power
mode)
- Switch from Celiaiua degreea to Ftrenheit degreea and reciprocally, from Ftrenheit degreaa to Celiaiua degreea
(within temperature mode)
- Select « T° » to enter/exit the tempertture mode or the power lieveli mode.
23