Adventys BRIC Serie Guide D'utilisation page 22

Temperature setting
For using the product in temperature mode, press « T° » touch.
When an induction-friendly pan is on the cooktop product. The power 4-digit display indicates the level of
regulation. The level of regulation indicate is a level of temperature between 30°C and 140°C or 86°F and 284°F.
It is at any time possible to press on touches (+) or (-) POWER / TEMPERATURE to increase or decrease the level
of regulation of power.
Setting possible:
30°C < TEMPERATURE IN °C < 140°C
86°F < TEMPERATURE IN °F < 284°F
When a level of temperature is selected the indicator of temperature light blink.
Once the temperature of instruction reached, a brief sound signal is listened and the indicator light of
temperature stop blinking to be fixed.
Aa aoon ta the ptn ia removed from the cooking zone, the power or tempertture diaplity indicttea the tbaence
of the ptn by t bliinking. There ia clioae to no conaumption of power. If the power or tempertture diaplity
fltahea when the ptn recovera the cooking zone, it metna thtt the mtteritli of the ptn ia not coompttiblie with
the induction technoliogie. To check if t ptn ia induction-friendliy, plitce t mtgnet undernetth, if it atichea, the
ptn ia ok for induction.
Control of the temperature
At any time, it is possible to check the temperature of the pan.The product has to be in temperature
mode (T °) (°C or °F) and the indicator light of temperature must be fixed.
Press simultaneously « P1 » and « P2 » .The keyboard displays the actual temperature of the bottom of the
vitro céramic .
If the pan possesses a good thermal transmission, the temperature in the pan will be equal to the temperature
indicate +/-5 °C.
If the indicator(informer) of temperature is not fixed, if the pan does not possess a flat bottom, or if its
thermal conduction is bad, the temperature of the pan will be inconsistent with the temperature of
instruction.
111 lievelia of tempertture
199 lievelia of tempertture
22