Publicité
All manuals and user guides at all-guides.com
OBJ_DOKU-186956-007.fm Seite 10 Dienstag, 4. Juni 2019 1:53 13
IMPORTANT!
Please read all information carefully.
These instructions for use do not replace the user manual of the
electrosurgical unit used! Read the user manual of the electro-
surgical unit and ask Erbe or your distributor in case of doubt!
1
Intended use
The footswitches can be used to activate or deactivate the Erbe
units intended for this purpose.
The ReMode button on the footswitch can be used to toggle be-
tween the settings options of a selected program.
2
Normal use
20188-300, 20189-300, 20189-302: This product is intended
for connection to the following electrosurgical units: VIO 200 S,
VIO 300 S, VIO 200 D, VIO 300 D.
20189-301, 20189-303: This product is intended for connec-
tion to the following electrosurgical units: VIO 200 D, VIO 300 D.
20188-302: This product is intended for connection to the fol-
lowing electrosurgical units: VIO 200 D, VIO 300 D (both from
software version 1.7.6).
20322-101: This product is intended for connection to the fol-
lowing smoke evacuation units: IES 2, IES 3.
The product is AP protected.
The product satisfies the requirements of IP X8.
1.) The ReMode button is only available for 20188-302, 20189-301 and
20189-303.
1)
10
Publicité
