Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
My computer does not boot up when connected to Switch2, but works fine when I
connect the keyboard, video and mouse directly to it.
•
Make sure that the keyboard and mouse cables are connected tightly between Switch2
and the computer.
•
Check that the USB cables are not crossed, i.e., make sure the connectors are plugged into
the correct ports.
Video
I am getting ghosting, shadowing, or fuzzy images on my monitor.
•
Check that all video cables are inserted properly.
•
Check that the monitor you are using supports the resolution
and refresh-rate setting on your computer.
•
Check that the graphics card you are using supports the resolution
and refresh-rate setting on your computer.
•
Connect the monitor directly into the computer you are having trouble
with to see if the problem still appears.
I am getting a black screen on my monitor.
•
Check that all video cables are inserted properly.
•
Connect your monitor directly to the computer to verify that your monitor
is functioning properly.
•
Take your computer off standby mode.
•
Check that the power supply is properly connected.
Troubleshooting
| 018
18-19
All manuals and user guides at all-guides.com
Troubleshooting
Keyboard
My computer does not detect my keyboard and I get a keyboard error reported at
boot up.
•
Check that your keyboard cable is connected properly to Switch2. Tighten any
loose connections.
•
Enable USB support on your BIOS.
•
Connect the Switch2 USB cable directly to a USB port on your computer.
•
Make sure that the drivers for your keyboard are installed on your computers.
•
Uninstall all other keyboard drivers from your computers.
•
Try swapping your keyboard with a different one.
Mouse
My mouse is lost when I switch to a different computer.
•
Check that your mouse cable is connected properly to Switch2.
Tighten any loose connections.
•
Attach the mouse directly to the computer with which
you are experiencing mouse problems.
•
Allow up to one minute after your computer wakes up from
standby mode for mouse function to return.
•
Deactivate power management schemes on the computer
with which you are experiencing problems.
•
Try swapping the mouse with a different one.
Troubleshooting
| 019
7/11/06 4:48:19 pm
Publicité
