Belkin Switch2 Mode D'emploi page 11

How to Install your Switch2
2.5 Using your Switch2's built-in six-foot (1.8m)
cable, connect the VGA connector to the VGA
port on your second computer. Connect the
USB connector to an available USB port and the
speaker connector to the speaker jack.
You are now ready to use your Switch2.
Installing Switching Software (optional)
In addition to using the front-panel buttons on Switch2, you can also install software
onto your computers that will allow you to use your keyboard or a desktop icon to switch
computers.
To install the Switch2 software on your Mac mini and other computers using Mac OS X v10.3
and above:
1. Insert the Switch2 CD into your CD-ROM drive.
2. Wait for the " Switch2" window to appear on your desktop and then double-click
on "start.osx".
3. Select "Install" and follow the instructions.
4. Once the software is successfully installed, the
the upper-right corner of your screen.
How to Install your Switch2 | 010
10-11
All manuals and user guides at all-guides.com
icon will appear in the menu bar in
How to Install your Switch2
To install the Switch2 software on computers using Windows 2000 or XP:
1. Insert the Switch2 CD into your CD-ROM drive.
2. Wait for the CD to auto-load. If it does not auto-load, access your CD-ROM drive and
locate the "Setup.exe" file on the CD. Double-click on the "setup" icon.
3. Select "Install" and follow the instructions.
4. Once the software is successfully installed, the
lower-right corner of your screen.
icon will appear in the taskbar in the
How to Install your Switch2 | 011
7/11/06 4:48:12 pm