Belkin Switch2 Mode D'emploi page 10

How to Install your Switch2
1.3 Connect your speaker cable to the speaker jack on
the back of your Switch2 (optional).
1.4 Connect the power adapter cable to the back
of your Switch2 and plug in the adapter.
2. Connecting your Computers
2.1 Make sure your Mac mini and second computer are
both powered on.
2.2 Connect the VGA adapter that shipped with your
Mac mini to the DVI monitor port on the back of
your Mac mini.
How to Install your Switch2 | 08
8-9
All manuals and user guides at all-guides.com
How to Install your Switch2
2.3 Stack your Switch2 below or on top of your Mac
2.4 Using your Switch2's built-in two-foot (0.6m)
mini.
cable, connect the VGA connector to the VGA
adapter on your Mac mini. Connect the USB
connector to an available USB port and the
speaker connector to the speaker jack.
How to Install your Switch2 | 09
7/11/06 4:48:10 pm