Télécharger Imprimer la page

Toshiba MMU-AP0071YH Manuel D'installation page 213

Masquer les pouces Voir aussi pour MMU-AP0071YH:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
CONFIRMATION OF INDOOR UNIT SETUP
Prior to delivery to the customers, check the address and setup of the indoor unit, which has been installed in this
time and fill the check sheet (Table below). Deta of four units can be entered in this check sheet. Copy this sheet
according to the No. of the indoor units. If the installed system is a group control system, use this sheet by entering
each line system into each installation manual attached to the other indoor units.
This check sheet is required for maintenance after installation. Be sure to fill this sheet and then pass this
Installation Manual to the customers.
Indoor unit setup check sheet
Indoor unit
Room name
Model
Check indoor unit address. (For check method, refer to Applicable controls in this sheet.)
* In case of a single system, it is unnecessary to enter the indoor address. (Item code: Line [12], Indoor [13], Group [14], Central control [03] )
Line
Indoor
Group
Central control address
Various setup
Have you changed high ceiling setup? If not, fill check mark [×] in [NO CHANGE], and fill check mark [×] in [ITEM] if changed, respectively.
(For check method, refer to Applicable controls in this sheet.) * In case of replacement of short plugs on indoor microcomputer P .C. board, setup is automatically changed.
High ceiling setup
(Item code [5d])
o NO CHANGE
o STANDARD
[0000]
o HIGH CEILING 1
[0001]
o HIGH CEILING 3
[0003]
Have you changed lighting time of filter sign? If not, fill check mark [×] in [NO CHANGE], and fill check mark [×] in [ITEM] if changed, respectively.
(For check method, refer to Applicable controls in this sheet.)
Filter sign lighting time
(Item code [01])
o NO CHANGE
o NONE
[0000]
o
150H
[0001]
o 2500H
[0002]
o 5000H
[0003]
o 10000H
[0004]
Have you changed detected temp. shift value? If not, fill check mark [×] in [NO CHANGE], and fill check mark [×] in [ITEM] if changed, respectively.
(For check method, refer to Applicable control in this sheet.)
Detected temp. shift value setup
(Item code [06])
o NO CHANGE
o NO SHIFT
[0000]
o +1°C
[0001]
o +2°C
[0002]
o +3°C
[0003]
o +4°C
[0004]
o +5°C
[0005]
o +6°C
[0006]
Incorporation of parts sold separately Incorporation of parts sold separately Incorporation of parts sold separately Incorporation of parts sold separately
Have you incorporated the following parts sold separately? If incorporated, fill check mark [×] in each [ITEM].
(When incorporating, the setup change is necessary in some cases. For setup change method, refer to Installation Manual attached to each part sold separately.)
Panel
o Standard panel
Filter
o Super long life filter
o Others (
)
o Others (
)
All manuals and user guides at all-guides.com
REQUIREMENT
Indoor unit
Room name
Model
Line
Indoor
Group
Central control address
Various setup
High ceiling setup
(Item code [5d])
o NO CHANGE
o STANDARD
[0000]
o HIGH CEILING 1
[0001]
o HIGH CEILING 3
[0003]
Filter sign lighting time
(Item code [01])
o NO CHANGE
o NONE
[0000]
o
150H
[0001]
o 2500H
[0002]
o 5000H
[0003]
o 10000H
[0004]
Detected temp. shift value setup
(Item code [06])
o NO CHANGE
o NO SHIFT
[0000]
o +1°C
[0001]
o +2°C
[0002]
o +3°C
[0003]
o +4°C
[0004]
o +5°C
[0005]
o +6°C
[0006]
Panel
o Standard panel
Filter
o Super long life filter
o Others (
)
o Others (
)
Indoor unit
Room name
Model
Line
Indoor
Group
Central control address
Various setup
High ceiling setup
(Item code [5d])
o NO CHANGE
o STANDARD
[0000]
o HIGH CEILING 1
[0001]
o HIGH CEILING 3
[0003]
Filter sign lighting time
(Item code [01])
o NO CHANGE
o NONE
[0000]
o
150H
[0001]
o 2500H
[0002]
o 5000H
[0003]
o 10000H
[0004]
Detected temp. shift value setup
(Item code [06])
o NO CHANGE
o NO SHIFT
[0000]
o +1°C
[0001]
o +2°C
[0002]
o +3°C
[0003]
o +4°C
[0004]
o +5°C
[0005]
o +6°C
[0006]
Panel
o Standard panel
Filter
o Super long life filter
o Others (
)
o Others (
)
Indoor unit
Room name
Model
Line
Indoor
Group
Central control address
Various setup
High ceiling setup
(Item code [5d])
o NO CHANGE
o STANDARD
[0000]
o HIGH CEILING 1
[0001]
o HIGH CEILING 3
[0003]
Filter sign lighting time
(Item code [01])
o NO CHANGE
o NONE
[0000]
o
150H
[0001]
o 2500H
[0002]
o 5000H
[0003]
o 10000H
[0004]
Detected temp. shift value setup
(Item code [06])
o NO CHANGE
o NO SHIFT
[0000]
o +1°C
[0001]
o +2°C
[0002]
o +3°C
[0003]
o +4°C
[0004]
o +5°C
[0005]
o +6°C
[0006]
Panel
o Standard panel
Filter
o Super long life filter
o Others (
)
o Others (
)
EH99832901

Publicité

loading

Ce manuel est également adapté pour:

Mmu-ap0091yhMmu-ap0121yhRbc-uy135pg