Jura ENA Micro 9 One Touch Mode D'emploi page 19

All manuals and user guides at all-guides.com
Example: Change the water hardness setting from
to .
16°dH 25°dH
Precondition: is displayed.
READY
k T Press and hold the Rotary Switch until
appears.
RINSE
g T Turn the Rotary Switch until
is displayed.
k T Press the Rotary Switch to enter the
program item.
16°dH
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to confirm the
setting.
, the water hardness is set.
OK
HARDNESS
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Energy-saving mode
The energy-saving mode (Energy Save Mode,
E.S.M. ) helps you to prevent your machine from
©
consuming power unnecessarily and to actively
save energy:
U
ENERGY p
U
Soon after the last preparation, the ENA
stops heating up. After about 5 minutes the
message
ENERGY ON
U
Before you can prepare a specialty coffee,
specialty coffee with milk, or hot water, the
machine must heat up.
U
ENERGY -
U
The ENA is constantly ready for use.
U
All specialty coffees as well as hot water can
be prepared without having to wait.
Example: Change the energy-saving mode from
to
ENERGY p ENERGY -
Precondition:
is displayed.
READY
k T Press and hold the Rotary Switch until
appears.
RINSE
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the
g T Turn the Rotary Switch until
HARDNESS
k T Press the Rotary Switch to confirm the
is
25°dH
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming
is
EXIT
Automatic switch-off
By instructing your ENA to automatically switch
itself off, you can cut down your energy consump-
tion. If this function is activated, your ENA switches
off automatically after the preset time following
the last action on the machine.
The automatic switch-off can be set to between
15 minutes and 9 hours.
Example: Change the switch-off time from
2 HRS
Precondition:
k T Press and hold the Rotary Switch until
is displayed.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the
g T Turn the Rotary Switch until
k T Press the Rotary Switch to confirm the
.
g T Turn the Rotary Switch until
4 Permanent settings in programming mode
displayed.
program item.
ECONOMY p
is displayed.
setting.
, the energy-saving mode is set.
OK
ENERGY -
displayed.
mode.
READY
to .
1 HRS
is displayed.
READY
appears.
RINSE
is displayed.
program item.
2 HRS
displayed.
setting.
, the switch-off time is set.
OK
OFF AFTER
displayed.
de
is
ENERGY p
en
ECONOMY -
fr
is
EXIT
it
nl
es
OFF AFTER
pt
is
1 HRS
ru
is
EXIT
19