Operation - Haier AD122ALEAA Manuel D'instructions, D'installation, D'utilisation Et D'entretien

Operation

HEALTH
C
CHECK
VENTILATION mode
(only for the unit with fresh air function or heat recovery function)
Press the RECOVERY button, then the unit will switch over the ventilation mode:
[ ] [VENTILATION][AUTO]
Please select appropriate ventilation mode.
2
3
SET RECOVERY
1,4
[VENTILATION][RECOVERY]
(1)Start up operation:
Press the ON/OFF button. The system will start up
display will be on LCD.
(2)Select operation mode :
Press the MODE button.
the [MODE] display section changes as
[FAN ONLY] [COOL]
[FAN ONLY].
Select [FAN ONLY].
(3)Select fan speed:
Press the FAN button. Each press, fan speed in the [FAN]
display section changes as
[HIGH] [MED] [LOW]
Select proper fan speed.
(4)Power off:
Press the ON/OFF button. Indoor unit will be powered off,
and there are only the time and the ambient temperature
in the screen.
[VENTILATION][NORMAL]
9
Fan Only
and the
Each press, operation mode in
follows:
[DRY] [HEAT] [AUTO]
follows:
[HIGH].
[ ]