Hoover Candy Manuel D'utilisation page 11

NOTE: Use only the charger supplied with your cleaner to recharge. It is normal if the charger becomes warm when the
product is charging.
NOTE: If you are not going to use the cleaner for a long period of time, please remove the battery pack from the cleaner
to maintain the battery life.
USING YOUR CLEANER [Fig. 2]
Remove the cleaner from the charger and then press the on/off LED button.
The on/off LED button will illuminate in fixed blue colour (if the product charge is >10%) and the frontal LED light will
illuminate in white colour. When you finish to use it, turn the product off pressing the on/off LED button, empty and clean
the dust bin and the filter after each use or when the dust bin becomes full. Please refer to CLEANER MAINTENANCE
section.
This cleaner is equipped with a on/off LED button on main body. When the product is switched on, the LED will illuminate
or be off to show the battery level.
Battery level:
The on/off LED is on (fixed blue color):
The on/off LED is blinking in red color and the flashing frequency is 1HZ:
The on/off LED is off: charge
ACCESSORIES [Fig. 3]
All accessories can be fitted directly onto the cleaner main body.
To remove the accessory, press the accessory release button and pull it away from the main body. If the accessory is not
equipped with a release button, pull it away from the main body.
3 IN 1 TOOL:
Crevice tool: Suitable for cleaning corners and hard to reach areas. [Fig. 3-6]
Dusting brush: Ideal for cleaning hard surfaces without damaging or scratching. [Fig. 1-4 and Fig. 3-7]
Furniture nozzle: Perfect for fabric surfaces such as mattresses and sofas. [Fig. 1-4 and Fig. 3-8]
POWER PET NOZZLE*: [Fig. 3-9]
Ideal for removing pet hairs and allergens from soft furnishings and carpeted stairs.
Do not touch the rotating brush, when the product is switched on. Do not keep the nozzle stationary while the brush is
rotating.
SPACE AND FOOD SAVER KIT*:
The space saver kit allows you to reduce the volume of soft goods and cloths to optimize space at home or when travelling.
[Fig. 3-11]
The food saver kit optimizes space inside your fridge or freezer and keeps food fresh and secure for longer with no air
inside the bag. [Fig. 3-10]
WARNING: Keep away food and space saver bags from children. They are made from plastic and could become hazardous
to children, if left unsupervised. Make sure these bags are stored up high and out of the reach of young children.
How to use the Food Saver kit*:
1. Insert the kit connector into the product inlet.
2. Insert the Food Saver tool into the kit connector. [Fig. 3-12]
3. Take the vacuum bag for food, open it grabbing each side of the zipper and pulling the side apart.
4. Put the food inside the bag, placing the open bag face-up on a flat surface. The air valve and the fill line must be facing
upwards. [Fig. 3-13] Be sure not to overfill the bag.
5. Take one sure-zip (included in the kit) and put it on the top of your vacuum bag to help you sealing it. Firmly grasp the
sure-zip slider using your thumb and index fingers. Then, slide the zipper across the top of the bag. Make sure to slide
the zipper back and forth at least twice. Press down a little harder to ensure a tight seal has been made, and no air will
leak out. [Fig. 3-13]
6. Run your fingers along the zipper. To ensure that the zipper is completely sealed, slide your fingers along the zipper
track and press down. You should be able to feel if any areas are not sealed.
7. Place the circular red component of the Food Saver tool onto the air valve. Make sure to cover the air valve completely
with this red component. [Fig. 3-14]
* Certain Models Only
charge
4
charge
GB