Product Components - Hoover Candy Manuel D'utilisation

Do not use the appliance to clean animals or people.
Do not replace the batteries with non-rechargeable batteries.
The Environment:
This appliance is marked according to the European directive 2011/65/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The symbol on the product indicates that this product may not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for
waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you purchased the product.
This product complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

PRODUCT COMPONENTS

A. Battery Cover
B. Battery Pack
C. ON/OFF LED button
D. Dust Bin Release Button
E. Dust Bin
F. Frontal LED Light
G. Pre-motor Filter
H. Metal Mesh
I. 3 in 1 Tool
J. Cleaning Brush
PREPARING YOUR CLEANER [Fig. 1]
Carefully remove your product from the packaging.
1. Insert the battery pack into the product handle and rotate the battery pack cover clockwise. [Fig. 1-2]
2. Make the charger cross through the charge base. [Fig. 1-2]
3. Insert the charger back into the charger base and press.
4. Press the wire into the wire slot. [Fig. 1-2]
5. Put the product on the charger base. [Fig. 1-3]
6. Put the 3 in 1 tool on the charger base. [Fig. 1-3]
7. Insert the accessory box* into the back of charger base. [Fig. 1-5 and Fig. 1-6]
8. Press the wire into the wire slot. [Fig. 1-5 and Fig. 1-6]
9. Put the Power pet nozzle* into the accessory box*. [Fig. 1-5]
10. Put the Space & food saver kit* into the accessory box*. [Fig. 1-6]
NOTE: Use only the charger supplied with your cleaner to recharge. It is normal if the charger becomes warm when the
product is charging.
CHARGING [Fig. 2]
Remove all the accessories from the cleaner, then put the product on the charger base and plug the charger into suitable
socket outlet. [Fig. 2-1 and Fig. 2-2]
The product will start to charge and the on/off LED button will blink in blue color. The blinking frequency is 1HZ. [Fig. 2-3]
When the product is fully charged, the on/off LED button will be on (fixed). [Fig. 2-4]
* Certain Models Only
K. Charger and Charger Base Back
L. Charger Base
M. Accessory Box*
N. Power Pet Nozzle*
O. Food Saver Tool*
P. Kit Connector*
Q. Space Saver Tool*
R. Vacuum Bag for Soft Goods And Cloths*
S. Vacuum Bags for Food*
3
GB