Télécharger Imprimer la page

Kenmore Elite Manuel D'utilisation Et D'entretien page 34

Cuisinière à deux fours

Publicité

Les langues disponibles

Les langues disponibles

Self-Cleaning
To Start the Self-Clean Cycle
The FLEX CLEAN
pad controls the Self-Cleaning feature. If you are
planning to use the oven directly after a self-clean cycle remember to
allow time for the oven to cool down and the oven door to unlock. This
normally takes about one hour. So a 3 hour self-clean cycle will actually
take about 4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour
cycle for average soils, and a 4 hour cycle for heavy soils (to assure
satisfactory results)
INSTRUCTIONS
To start an immediate Self-Cleaning cycle or to set a Delay
Start time of 4:30 and shut-off automatically (example
provided is a default 3 hour Self-Clean Cycle)
1. Be sure the clock is set with the correct time of day and the oven
door is closed.
2. Press
.
3. Press
. "CLEAN" will flash and "3:00 HR" will show in the
display (Fig. 1). The control will automatically clean for a 3 hour
period (default self-cleaning cycle time). Note: If a 2 or 4 hour
clean time is desired, press
4 0 0
for a 4 hour clean time. Set the cleaning time based on
the amount of soil: light, medium or heavy (* See above).
4. Press
. The "DOOR LOCKED" icon will flash; "CLEAN" icon
and the letters "CLn" will remain on in the display (Fig. 2).
5. As soon as the control is set, the motor driven oven door lock will
begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will stop flashing and remain on.
Also, the oven icon will appear in the display (Fig. 3).
Note: Allow about 15 seconds for the oven door to lock.
Note: If the optional delay Self-Clean feature is desired, finish step
6-9. If Self-Clean is started immediately skip the remaining steps
and continue with "When the Self-Clean cycle is done" on the
following page.
6. Press
(Fig. 4). Enter the desired start time using the number
4 3 0
pads
(Fig. 5).
7. Press
. "CLEAN", "DELAy", "LOCK" and "DOOR" will be
displayed (Fig. 6).
9. The control will start the self-cleaning at the set start time, for the
period of time previously selected. At that time, the icon "DELAy"
will go out.
When the Self-Clean Cycle is Completed
1. "HOT" will appear in the display. The time of day, the "DOOR
LOCKED" and "CLEAN" icon will remain in the display.
2. Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED" icon is no longer displayed, the oven door
can then be opened.
All manuals and user guides at all-guides.com
2 0 0
for 2 hour or press
care when opening the oven door after the Self-
Cleaning cycle. Stand to the side of the oven
when opening the door to allow hot air or steam
to escape.
open. This can damage the automatic door locking
system. Use caution and avoid possible burns when
opening the door after the Self-Cleaning cycle has
completed. The oven may still be VERY HOT.
PRESS
2 0 0
4 0 0
4 3 0
34
To avoid possible burns use
DO NOT force the oven door
DISPLAy
Fig. 1
Fig. 2
or
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Publicité

loading