Jägermeister JEMUS TAP MACHINE Manuel Du Propriétaire page 14

Figure 4 - Front View
Filter and Drip Tray
Figure 5 - Top View
Figure 6 - Level Indicator
All manuals and user guides at all-guides.com
Removable-Reusable Filter Assembly
The filter must be kept clean to allow for proper
ventilation. If the filter is clogged the machine will
not be able to effectively cool the Jägermeister.
If you notice the machine has gotten warmer over
time, this is by far the most likely cause.
The filter can be vacuumed or cleaned under
warm water. If you use water to clean the filter
it should be allowed to dry completely before
using the machine.
The filer is held in place at the FRONT of the
machine by a filter tray. When the drip tray is
in place, the filter is not visible. When removing
the drip tray for cleaning, the filter will also be
extracted from the filter tray.
If the filter is damaged a replacement can
be ordered at www.tapmachine.com
or 1-800-713-8881.
Bottle Well
This acts a reservoir that fills with Jägermeister
when bottles are supplied to the machine.
Bottle Well Cover (flipped open)
These should always be sealed closed when
a bottle is not present.
Level Indication
An "L" shown on the digital display (left)
indicates that the level of Jägermeister
has fallen below 420ml. An "F" shown on
the digital display indicates the level of
Jägermeister is above 420ml.
NOTE: The refrigeration system will shut off
and no longer chill the Jägermeister when
the "L" is displayed. Once the level is above
420ml, the display will change from "L" to "F"
and the refrigeration system will turn on.
14