LENCO Discman Manuel De L'utilisateur page 12

Storing FM Presets
You can save up to 30 FM stations.
1. Tune to the station you wish to store.
2. Press and hold the PRESET button, "Preset Store" will be displayed.
3. Press the or
4. Press the ENTER button to store.
Recall Stored FM Presets
1. Press the PRESET button, "Preset Recall" will be displayed.
2. Press the or
3. Press the ENTER button to recall.
Displaying FM Station Information
There are several types of information provided by the radio station. To display the information, press the INFO /
MENU repeatedly.
FM MENU OPERATION
Press and hold the MENU button to access the menu control. Then press the
described below.
Scan Setting
1. Press and hold the MENU button to access the menu control.
2. Press the or
3. Press the or
to confirm. When the "Strong stations only" is selected, scanning will ignore the noisy stations and only capture
the strong stations. When "All stations" is selected, all possible stations will be captured during scanning even if
it is a bit noisy.
4. The next time doing the scanning the unit will search for the stations based on this scan setting.
CD OPERATION
Loading and Playing CD Disc
Open the CD door. Install a disc with the CD label side facing up. Close the CD door. Press the SOURCE button to CD
mode. After reading, it will automatically start to play.
Play/Pause Control
To pause playback press the PLAY/PAUSE
Stop Control
To stop playback press the STOP
Skip Track
During playback press the
button to select the desired preset number to store.
button to select the desired preset number to recall.
button until "Scan setting" is displayed and then press the ENTER button.
button to toggle between "Strong stations only" and "All stations". Press the ENTER button
button. Press the button again to resume playback.
button.
or button to skip to the previous or next track.
or
12
button for different options as