Publicité
Les langues disponibles
Les langues disponibles
®
The West Bend
Cocoa~Latte
Note: Do not wash any parts in the dishwasher and do not immerse the motor base
or the mixing container in water or other liquid.
1.
Unplug the appliance from the electrical outlet. Allow the entire appliance to
cool before cleaning.
2.
Remove the mixing container from the motor base.
3.
Pour out any unused portion of the hot drink mixture.
4.
Without submerging the mixing container, wash the interior by pouring a
combination of mild detergent and water into the mixing container. Rinse and
dry thoroughly.
5.
Open the dispensing valve and allow clean water to flush through and clean the
valve. After each use, unscrew and disassemble the valve for cleaning. See
"Cleaning the Dispensing Valve" instructions below.
6.
Wash the lid with mild detergent and water.
7.
Wipe the exterior of the motor base and mixing container with a soft, damp
cloth.
Stopper Pin
Valve Body
To disassemble the valve for cleaning:
1.
Remove the valve from the container by unscrewing the entire valve body
counter-clockwise.
2.
Remove the cap by unscrewing it counter-clockwise.
3.
Remove the stopper/stopper pin, spring, cap, and lever from the valve body.
Note: The stopper and stopper pin are tightly fit and need not be separated.
4.
Compress the cap and stopper together to remove the lever and cap.
5.
Clean all parts and reassemble in the order shown.
C
Y
LEANING
OUR
™
Hot Drink Maker should be cleaned after every use.
Cleaning the Dispensing Valve
Lever
C
~L
OCOA
ATTE
Spring
Stopper
5
™
Publicité
