Samsung MX-ST40B Manuel Complet page 20

04 CONNECTING AN EXTERNAL DEVICE
Connect to an external device via a wired or wireless network to play the external device's sound
through the Sound Tower.
Connecting using an Analogue Audio (AUX) Cable
stereo cable (not supplied)

- AUDIO -
R
 3.5mm stereo Cable (AUX1)
1. Connect AUX1 jack on the main unit to the AUDIO OUT jack of the Source Device using an 3.5mm
stereo cable.
2. Select "AUX1" mode by pressing the
• You can also select a source using AUX button on the remote control.
 Audio Cable (AUX2)
1. Connect AUX2 (IN) terminals on the main unit to the AUDIO OUT terminals of the Source Device
using an audio cable.
2. Select "AUX2" mode by pressing the
control.
• You can also select a source using AUX button on the remote control.
3.5mm
Rear of the Sound Tower
AUX 1

Audio (AUX) Cable (not supplied)
L
BD / DVD player / Set-top box / Game console
(Source) button on the top panel or on the remote control.
(Source) button on the top panel or on the remote
ENG - 13
Mobile device / MP3 / PMP