Publicité
Les langues disponibles
Les langues disponibles
Rear Panel of the Sound Tower
Bluetooth
PAIRING
ADD STEREO
GROUP PLAY
USB
GROUP PLAY
OUT
Terminals
GROUP PLAY
IN Terminals
AUX1
Power
AUX 1
USB
(5V 0.5A)
POWER
Press the
PAIRING button to enter pairing mode, "PAIRING" LED on the rear plane
will be fast blink.
Press the ADD STEREO button to connect to another same model Sound Tower
wirelessly.
Press the GROUP PLAY button to connect up to ten Sound Tower systems wirelessly.
Connect a USB device to the USB port on the main unit.
• Press the
(Source) button to select USB.
Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the
main unit to Audio In on an external analogue output device.
Use an Audio Cable (not supplied) to connect AUX2(IN) terminals on the main unit to
Audio Out on an external analogue output device.
Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to
Audio Out on an external device.
Connect the power cord to the Power jack and connect the other end of the power
cord to a wall socket to supply electrical power to the Sound Tower.
AUX 1
ENG - 4
USB
(5V 0.5A)
Publicité
