Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Charging method 1 - inside the bike
EnergyPak Smart 375
1.
Pull and rotate the charge-port cover clock-
wise to expose the charge-port.
2.
Connect the charger to the charge-port on
the bike
3.
Connect the charger to an AC outlet.
(Charging operation can be discontinued at
any given time.)
4.
Disconnect the charger first from the outlet
and then from the charge port.
5.
The bike is ready for usage.
Charging Method 2 - outside the bike
EnergyPak Smart 375
1.
Hold the battery in the frame to make sure it
cannot drop when unlocking.
2.
Insert the key and unlock the EnergyPak. The
Energypak will be ejected slighty.
3.
Pull the battery out of the bike.
4.
Connect the charge adapter (F) to charger.
5.
Connect the charger to the EnergyPak. It only
fits in one orientation.
6.
Connect the charger to an AC outlet.
7.
Charging operation can be discontinued at
any given time.
8.
Disconnect the charger first from the outlet
and then from the EnergyPak
9.
Reinstall the EnergyPak and make sure the slots are aligned correctly at the bottom
10. Push the top of the EnergyPak and make sure the EnergyPak is secured properly. A 'click' can be
noticed while doing so.
11. Pull out the key.
12. The bike is ready for usage.
6
1
1 2
3
4
F
2
Publicité
