General Safety Instructions - Bosch T40421 Instructions D'origine

en-us | 49 | T40421

2 General Safety Instructions

WARNING
Read and follow all safety notes and instructions
Failure to follow the safety instructions could result in
serious personal injuries and severe damage to
materials.
Observe and follow the safety notes below.
The shock-proof protection caps have been
specifically constructed for their intended use. The
safety of the shock-proof protection caps can no
longer be ensured it they are misused or modified in
ways not expressly approved by the manufacturer.
Serious injures or severe damage to materials could
occur.
Ensure that each person using the shock-proof
protection caps is familiar with these instructions
and can access them at all times.
Ensure that all users are also familiar with the
instructions of the additional tools and workshop
equipment that are necessary for the work.
Carefully read and adhere to the instructions in the
technical safety information of the Volkswagen
Group brands.
Observe and follow the basic information and safety
notes in the corresponding Volkswagen Group
information materials for use on vehicles with high-
voltage components.
Follow the laws specific to each country where used.
Always wear the personal protective equipment as
described in the workshop manuals of the
Volkswagen Group brands.
Use the shock-proof protection caps only for the
work approved by the Volkswagen Group.
Use the shock-proof protection caps only with the
accessories approved by the Volkswagen Group.
Use only the plastic screws included in delivery.
Tighten the screws with the specified torques (see
the workshop manuals of the Volkswagen Group
brands).
2019-02-27
Keep the workplace tidy and clean. Liquids or other
contaminants could affect the function of the shock-
proof protection caps.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany