INFOSEC UPS SYSTEM BACKUP MODULE Manuel Utilisateur page 40

Step 5: Once the backup module is opened, remove the battery fixing plate present
on the left side of the backup module by unscrewing the 2 screws present.
Note: To install the second branch of batteries, repeat the same procedure on the
battery fixing plate on the right side of backup module.
Step 6: Now, it is possible to put all batteries inside of unit by following below
picture (in the following drawing are indicated the fasten positions for the
correct batteries placing).
Note: To install the second branch of batteries, repeat the same procedure on the
right side of backup module.
Step 7: Connecting all batteries following the wiring diagram shown in next
chapter.
40
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr - 07 19 AA 59 203 25