Selecting Installation Position; Rack Installation; Tower Installation - Infosec Ups System Backup Module Manuel Utilisateur

Selecting Installation Position

It is necessary to select a proper environment to install the unit, in order to
minimize the possibility of damage to the backup module and extend the life
of the batteries. Please follow the instructions below:
1. Keep at least 20cm (8 inches) clearance from the rear panel of the unit
from the wall or other obstructions.
2. Do not block the air-flow to the ventilation openings of the unit.
3. Please ensure the installation site environmental conditions are in
accordance with the unit's working specifications to avoid overheat and
excessive moisture.
4. Do not place the unit in a dusty or corrosive environment or near any
flammable objects.
5. This unit is not designed for outdoor use.
This unit can either be mounted or placed vertically on the desk.

Rack Installation

Tower Installation

31
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr - 07 19 AA 59 203 25