LENCO SCR-96 Manuel D'utilisation page 7

GENERAL OPERATION
PAUSE
STOP / EJECT
FAST FORWARD
REWIND
PLAY
RECORD
PLAYBACK
1. Set the "FUNCTION" selector to "TAPE" mode.
2. Press the "STOP / EJECT" button to open the cassette door and insert your tape.
3. Close the cassette door.
4. Press the "PLAY" button to start playing tape.
5. Adjust the "VOLUME" control to the desired level.
6. Press the "PAUSE" button when you want to stop playing tape operation temporarily.
7. Press the "STOP / EJECT" button when finished.
RECORDING
1. Press the "STOP / EJECT" button to open the cassette door and insert a blank tape.
2. Select the source you want to record.
To record from radio - Set the "FUNCTION" selector to "RADIO" mode and adjust the desired station.
To record from CD / MP3 - Place a disc on the CD compartment. Set the "FUNCTION" selector to
"CD / MP3 / USB" mode and select the desired track.
To record from USB - Plug or slot in USB device to the port. (Make sure no disc on disc tray. )
Set the "FUNCTION" selector to "CD / MP3 / USB" mode and select the desired track.
3. Press the "RECORD" button together with the "PLAY" button to start recording.
4. Press the "STOP / EJECT" button when finished.
All manuals and user guides at all-guides.com
TAPE OPERATION
Press to stop playing tape operation temporarily.
Press again to resume tape operation.
Press to stop tape operation.
Press again to open the cassette door after the tape spools stop turning.
& Press to start rapid tape winding either forward or reverse direction.
Press to start playing tape.
Press it together with "PLAY" button to start recording.
E-6