Kohler K-7219 Mode D'emploi page 8

Plug
Drain
Outlet
5. Complete the Installation
Secure the Connections and Fittings
Wrench tighten all connections and fittings to one quarter turn
past hand-tight.
Install the Trim
Insert the plug into the drain outlet. Adjust the height of the
plug, if desired.
NOTE: To ensure the setscrew does not inadvertently fall down the
drain outlet, push down on the plug to close the drain hole.
Secure the handle to the overflow outlet with the setscrew.
Turn the handle counterclockwise and clockwise to ensure proper
operation of the plug.
Complete the Freestanding Bath Installation
Install the bath apron, then install the bath faucet to complete the
installation. Refer to the bath and faucet manufacturer's
installation guide.
Complete the Drop-In Bath Installation
Install the bath faucet according to the bath faucet manufacturer's
installation guide.
Refer to the bath manufacturer's installation guide to complete
the finished deck or wall around the bath.
1054247-2-A
All manuals and user guides at all-guides.com
Overflow Outlet
Handle
Setscrew
8 Kohler Co.