Kohler K-7219 Mode D'emploi page 4

11-1/8"
(28.3 cm)
1-1/2" OD
2. Prepare the Site
CAUTION: Risk of product damage. Do not kink or cause
damage to the cable during installation.
Mark the drain location on the subfloor. For freestanding bath
installations, use the cut-out template provided with your bath to
assist you. For drop-in bath installations, refer to the roughing-in
dimensions illustrated.
Cut the marked drain location in the subfloor using a hacksaw.
Insert the drain into the P-trap through the cutout in the floor.
Install the finished floor material on the subfloor.
For freestanding bath installations:
Verify the distance from the top of the drain flange to the top of
the floor is 1-1/2" (3.8 cm). Adjust as needed to achieve this
distance.
For drop-in bath installations:
Verify the top of the drain flange is flush against the floor. Adjust
as needed.
1054247-2-A
All manuals and user guides at all-guides.com
12-1/2" (31.8 cm)
6-13/16"
(17.3 cm)
4
1-5/8" (4.1 cm)
2-1/4" (5.7 cm)
Kohler Co.