Troubleshooting - JVC EXAD KD-AVX11 Manuel D'instructions

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms
• No sound comes out of the speakers.
• The monitor is not clear and legible.
• The unit does not work at all.
• "No Signal" appears.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc can be neither recognized nor played .
• Disc cannot be ejected.
• Recordable/Rewritable discs cannot be
played back.
• Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Playback does not start.
• The playback picture is not clear and legible.
• Sound and pictures are sometimes
interrupted or distorted.
• No playback picture appears on the monitor. Parking brake lead is not connected properly.
• No picture appears on the external monitor.
Remedies/Causes
• Adjust the volume to the optimum level.
• Check the cords and connections.
• DTS sound cannot be reproduced through the analog
terminals (Speaker out/LINE OUT).
Sunshine from the windscreen may cause this symptom.
Adjust <Bright>. (☞ page 40)
Reset the unit. (☞ page 3)
• Change the source.
• Start the playback on the external component connected
to VIDEO IN plug.
• Check the cords and connections.
• Signal input is too weak.
Store stations manually. (☞ page 11)
Connect the aerial firmly.
Eject the disc forcibly. (☞ page 3)
Unlock the disc. (☞ page 19)
• Insert a finalized disc.
• Finalize the discs with the component which you used
for recording.
• Insert the disc correctly again.
• Region code of the DVD is not correct. (☞ page 4)
• The format of files is not supported by the unit.
Adjust items in <Picture Adjust>. (☞ page 40)
• Stop playback while driving on rough roads.
• Change the disc.
(☞ Installation/Connection Manual)
• Connect the video cord correctly.
• Select the correct input on the external monitor.
55
REFERENCES