JVC EXAD KD-AVX11 Manuel D'instructions page 47

Menu items
Message
Open
16
Search*
Special Device
Connect
Disconnect
Delete Pair
* 15
Selectable only when the device is compatible with SMS.
16
* To establish the connection, enter the specific PIN code of the device on the unit and/or the device.
When operating the Bluetooth device, refer also to the instructions supplied with the device.
Selectable settings, [reference page]
Only for the device being connected for "Bluetooth Phone."*
You can read a message from the following message histories.
Unread : Messages you have not read.
Read : Messages you have read.
Unsent : Messages you have not sent.
Sent : Messages you have sent.
Only for "NEW DEVICE."
Make the unit ready to establish a new Bluetooth connection. Select this when
establishing a Bluetooth connection with a device for the first time, mainly from the
device, ☞ [24].
• Once the connection is established, it is registered in the unit. You can connect the
unit and the device by using <Connect> (☞ below) from the next time.
Only for "NEW DEVICE."
Make the unit ready to establish a new Bluetooth connection. Select this when
establishing a Bluetooth connection with a device for the first time, mainly from the
unit. The unit searches for available new devices, ☞ [25].
• Before starting a search, turn on the Bluetooth function of the device so that the
unit can detect it.
• Once the connection is established, it is registered in the unit. You can connect the
unit and the device by using <Connect> (☞ below) from the next time.
Only for "NEW DEVICE."
Shows the list of Bluetooth devices which requires some special procedure to establish
Bluetooth connection. Select a device you want to connect, ☞ [25].
• After selecting the device, use <Open> or <Search> (☞ above) for connection.
• Once the connection is established, it is registered in the unit. You can connect the
unit and the device by using <Connect> (☞ below) from the next time.
Only for the registered devices.
After selecting a device from among the registered devices (☞ pages 26 and 29),
establish the connection with it, ☞ [25].
Only for the device being connected.
Disconnect the current device before connecting another device, ☞ [25].
Only for the registered devices.
Delete the registered devices, ☞ [26].
47
15
Continued on the next page
SETTINGS