Egret X+ Consignes D'utilisation page 56

SET6: Display brightness
SET7: Pedestrian mode
Exiting the Menu (save)
To leave the menu and save the settings
you have made, press the 'Plus' button (S)
and the 'Minus' button (T) at the same
time for around 2 seconds.
If you do not want to save the changes to
the settings, you can press the 'On/Off'
button (O) to re-start the scooter.
When the light is switched off, the bright
ness is always set to 100%. When switching on the light, the
brightness of the display is automatically dimmed. In the menu
you can set how much the display should be dimmed. To do this,
press the "plus key" for a brighter display and the "minus key" f
or a darker display.
Pedestrian mode The scooter has a pedestrian mode. Activate
the mode so that the scooter moves at walking speed. Press the
"plus key" or "minus key" to exit pedestrian mode.
56
O