Egret X+ Consignes D'utilisation page 41

3. The grub screw (D) on the handlebar must be positioned exactly above the hole (E) in
the steering tube. Screw in the grub screw so that it is flush with the handlebar.
This ensures that the handlebar is mounted at the correct angle.
4. Hand-thighten (6Nm) the two screws (F) on the handlebars.
Loose screw connections are dangerous!
Connections may come loose if not assembled correctly or if screws are not
tightened. This may lead to falls and accidents.
E
D
41