Egret X+ Consignes D'utilisation page 48

Charging
1. Connect the charger to the power outlet.
The charge socket (N) on the scooter is located on the front right side of the footboard under
the rubber mat.
closed
N
2. Open the protective cap of the charge socket (N).
3. Connect the charging cable to the Egret scooter when it is switched off.
4. The LED light on the charger will switch to red as soon as the charging process has started.
5. The LED light on the charger will switch to green as soon as the charging process has ended.
6. Unplug the charging cable.
7. Close the protective cap to protect the charging socket from water.
8. Disconnect the charger from the power outlet.
Before using your Egret for the first time, ensure that the battery is fully
charged using the power supply unit provided.
open
N
48