(2) Tighten the adjuster bolts that were temporarily fixed as shown on page 10. Make sure you
tighten the adjuster bolts with equal force.
Warning
Tighten all screws firmly. Otherwise, the projector or the mount may fall and cause personal
injury or damage.
When you have completed the projector installation, connect the necessary cables. Use
the cutout on the base frame unit so that the cables do not stick out.
For adjusting the image and more details on the projector, refer to the online User's
Guide at epson.com/support/brightlinkdownloads (US) or epson.ca/support/
brightlinkdownloads (Canada).
Make sure the table does not wobble after you have installed the projector.
15