Ventilation Molding; Cleaning; Cleaning The Appliance - Gaggenau VL 414 111 Notice D'utilisation

Closing the damper
1 Swing the damper to the right.
2 Press on the area marked
The damper will lock.

Ventilation molding

If downdraft ventilation is used next to a gas appliance,
a ventilation molding AA 414 010 must be fitted on the
gas appliance during cooking. The ventilation molding
improves extraction when using gas appliances. The
ventilation molding prevents extinction of small flames
due to the draft.
12
"
on the damper.

Cleaning

9
WARNING
Risk of burns
The appliance grows hot during operation. Let
appliance cool down prior to cleaning.
9
WARNING
Risk of electrical shock
Moisture entering the appliance can cause an
electrical shock. Don't use a high-pressure
cleaner or steam cleaner.
9
WARNING
Risk of injury
Components inside the appliance may have sharp
edges. Wear protective gloves.
NOTICE:
Surface damage
Do not use these cleaning agents
‒ Caustic or corrosive cleaners
‒ Oven cleaners
‒ Cleaners that are caustic, contain chlorine or are
aggressive
‒ Cleaners containing large proportions of alcohol
‒ Hard, scratchy dish-washing sponges, brushes or
scourers
If such an agent comes into contact with the appliance,
wipe it off immediately with water.
Thoroughly wash out new sponge cloths before using
them.

Cleaning the appliance

Note: Before cleaning, remove any jewelry from your
arms and hands.
Clean the appliance after each use once it has cooled
down. Remove spilt liquids immediately and do not allow
any food remains to dry on it.
Remove the damper for cleaning.Clean the damper and
the positioning plate in the dishwasher. Clean the
interior of the downdraft ventilation regularly as well.
You can use a special degreaser for stubborn dirt
(Product No. 00311297).