Télécharger Imprimer la page

Bosch NGM3050UC Manuel D'utilisation page 15

Masquer les pouces Voir aussi pour NGM3050UC:

Publicité

Les langues disponibles

Les langues disponibles

WARNING
Do not clean the cooktop while it is in operation.
Let the appliance cool down.
1.
Clean with a sponge, water and soap.
2.
Dry with a soft cloth.
3.
8.2 Cleaning the burners
Clean the surfaces of the burners after every use to
prevent them from becoming encrusted.
NOTICE:
Do not clean the burner parts in the dishwasher. They may
be damaged.
Wait until the appliance has cooled.
1.
Scrub with a non-metallic brush and soapy water.
2.
8.4 Cleaning recommendations
Follow these cleaning recommendations for the individual parts of your appliance.
Part / Material
Suitable cleaning method
Burner base /
¡ Non-abrasive cleaner: Dish soap and hot
aluminum alloy
¡ Mild abrasive cleaners: Bon Ami®
Rinse and dry immediately.
Burner cap / porcelain
¡ Non-abrasive cleaners: Dish soap and hot
enamel
¡ Mild abrasive cleaners: Bon Ami®
¡ Liquid cleaners: Soft Scrub®
¡ For food stains: abrasive cleaners such as
Rinse and dry immediately.
Control knobs and
Non-abrasive cleaners: Dish soap and hot
grommets
water
Dry thoroughly after cleaning.
1
These marks are registered trademarks of their respective owners. All other trademarks are trademarks of BSH Home
Appliances Corporation or its affiliated companies.
water
Scrub®
1
water, Fantastic®
1
1
Barkeepers Friend®
Dry the burners completely. If there are water droplets
3.
or damp patches on the cooktop when you start
cooking, the enamel may be damaged.
Reassemble the burner parts. Ensure that the burner
4.
caps are correctly positioned on the burner bases.
8.3 Cleaning the burner grates
Wait until the appliance has cooled.
1.
Carefully lift off the burner grates.
2.
Scrub with a non-metallic brush and soapy water.
3.
Carefully clean around the rubber feet. If the rubber feet
come off, the grates may scratch the cooktop surface.
Dry the burners grates completely. If there are water
4.
droplets or damp patches on the cooktop when you
start cooking, the enamel may be damaged.
Place the burner grates in their proper position.
5.
→  "Burner grates", Page 11
Important notes
¡ Do not scratch or gouge the port openings.
¡ Clean ports with a wire or a straightened
1
or Soft
paper clip.
¡ Do not use a toothpick, it may break off.
¡ Do not soak burner bases.
¡ A toothbrush can be used for stubborn
stains.
¡ Acidic and sugar-laden spills deteriorate the
enamel. Remove soil immediately after the
1
appliance has cooled enough to touch.
1
¡ Do not use wet sponge or towel on hot
porcelain.
¡ Do not soak burner caps.
¡ Always apply minimal pressure with abrasive
cleaners.
¡ Dry thoroughly and make sure the burner
cap is seated properly on the burner base
after cleaning.
¡ Do not remove the control knobs when
cleaning the appliance. The appliance may
be damaged if moisture finds its way inside.
¡ Do not remove grommets. You will require
Customer Service to refit them. DO NOT
USE THE COOKTOP WITHOUT ALL
PARTS FITTED CORRECTLY!
¡ Do not soak the control knobs or grommets.
¡ Do not clean the control knobs in the
dishwasher, they may be damaged.
¡ Do not use abrasive scrubbers or cleaners,
such as Bon Ami®
They may permanently damage the finish or
remove graphics.
Cleaning and maintenance en-us
1
, Ajax®
1
, or Comet®
1
.
15

Publicité

loading

Ce manuel est également adapté pour:

300 serie